LEGI grille B Proven. Robust. Reliable.

LEGI ball catching fence B/B.i with TÜV approval certificate for noise dampening, corresponding to the ordinance on the implementation of the Federal Emission Control Act.

The LEGI ball catching fence was specially designed as a ball catching grille, because the stress is significantly larger than with conventional fences. Ball catching grilles must be built to be extremely robust, but should have a certain amount of elasticity.

Posts and grilles joined at their connection: we have ideally coordinated this so that a high degree of security and efficiency are guaranteed largely free of maintenance.

  • Proven – the technology
    Double-drawn, round steel wires, horizontal 8 mm, vertical 6 mm and 8 mm Ø, offer the smallest contact surface to the aggressive air and rain quickly runs off. Therefore, they are quick drying and covered with small amounts of deposits. There is no risk of injury thanks to the roundness.
  • Robust – the post system
    Posts from IPE profiles according to static calculation. Installation by setting the posts in concrete at a height appropriate for flooding. Foundation sizes according to static requirements. Post spacing 2,520 mm with tolerances of +/- 10 mm. Easy bolting of the mounting bracket using commercially available tools.
  • Reliable – the structure
    With at least 7 opposed, horizontal, reinforced twin wires 8 mm Ø per 2,030 mm high grille. Reinforcement of the vertical grille ends facing the posts, each with 2 upright pieces of 8 mm Ø screw wire welded at a spacing of 25 mm. The remaining wire is 6 mm Ø.

Mesh:
Around the grille up to 2,000 mm height, 50 x 200 mm and above 100 x 200 mm. As a table tennis ball catch 34 x 200 mm, upright mesh.

Grille:
Effective length 2,520 mm = post spacing. The grille heights of 630 – 2,030 mm in stages of 200 mm. The grilles are bolted one upon the other.

Possibilities for use

  • Playgrounds
  • Football areas
  • Tennis courts
  • Sports facilities
  • Schools
  • Kindergartens

As a particularly high fence for securing commercial, industrial and private facilities. Also as a self-supporting trellis fence for greening.

Gates and entrances are offered in all standard sizes and shapes.

Corrosion protection (LKS / KS)
hot-dip galvanised DIN EN ISO 1461
electro-galvanised DIN 50961 and additional powder coating
hot-dip galvanised DIN EN ISO 1461 and additional powder coating
Standard colours (SF)
SF I
RAL
6005
Moos green
RAL
6009
Fir green
RAL
7016
Anthracite
SF II
RAL
9010
Pure white
RAL
7023
Concrete grey
RAL
9005
Black
RAL
7030
Stone grey
SF III
RAL
5010
Gentian Blue
RAL
8014
Sepia brown
RAL
3000
Fire red
We provide additional RAL colours upon request.