Stadium security fence Security in the stadium.

Order is primarily established in our major sports facilities by a good separation between the athletes and the spectators. More than four decades ago, we built the first suitable stadium security fence, which we have continued to develop in more than 40 stadiums.
We can therefore present you with a range of well-engineered boundary aids, which can already be helpful during your planning stage.

LEGI stadium security fence
This sturdy LEGI fence is based on the advantages of our R system, by which all horizontal wires are formed as reinforced twin wires and all individual wires are clamped on a clamping strip, each with one screw:

  • Each screw engages through the grilles, whereby the grille will not loosen from the post under load.
  • The grilles are strongly spot-welded with double-drawn, 8 mm thick steel wires.
  • They have an effective length of 2,500 mm.
  • The height of the grilles depends on your needs.
  • The mesh is tight at the bottom and easily transparent at the top up to 150 x 300 mm.
  • The upper edge of the grilles is bent by 45 degrees as a deflector
  • The posts consist of square pipes with welded steel caps in the required static stability

LEGI sector demarcation
We also draw on the LEGI R fence system here to maintain adequate separation. According to the gradient, the grilles are used horizontally and the upper and lower edges cut and welded with end wires. However, the grilles can also be installed perpendicular to the gradient. The mesh and thickness are adjusted to the requirements.

LEGI stadium security gates
In addition to the LEGI hinged gates with a particular stability for external fencing or sector separation, we have also engineered the stadium security gate for bordering the field of play in the event that the spectator sectors must make their way onto the field of play due to accidents, panic situations, etc.. The stadium security gates, normally with one door, have a special lock that can even be opened under extreme pressure against the gate and therefore against the lock. The opening may be actuated from the side of the field of play manually or electrically with the mains supply or battery supply, by cable or remotely.

Corrosion protection (LKS / KS)
hot-dip galvanised DIN EN ISO 1461
electro-galvanised DIN 50961 and additional powder coating
hot-dip galvanised DIN EN ISO 1461 and additional powder coating
Standard colours (SF)
SF I
RAL
6005
Moos green
RAL
6009
Fir green
RAL
7016
Anthracite
SF II
RAL
9010
Pure white
RAL
7023
Concrete grey
RAL
9005
Black
RAL
7030
Stone grey
SF III
RAL
5010
Gentian Blue
RAL
8014
Sepia brown
RAL
3000
Fire red
We provide additional RAL colours upon request.