Opening direction
Take your time to decide in what direction the gate should open. If you need to, right up until the time of installation.
The VARIO gate by LEGI is designed so that the opening direction can be set inwards or outwards when you begin installation. Already mounted gate doors can also be changed over to the left or right.
The posts of the VARIO gate can be installed right and left and the gate sections are usable right and left, opening outward and inward – very flexible.
Even the connection strips for the fences can be screwed in on both sides.
This means that the customer only needs to make a decision just before installation and the LEGI dealer always has the right gate in stock!
Technical information
In addition to the standard stocked gate section heights from 1,000 to 2,000 mm in the 200-grid and gate section widths from 1,000 to 2,000 mm in the 250-grid, we of course also offer other sizes to match the LEGI fence systems. The section widths within a framework dimension can be combined.
The gate mounting (interior view) can be adjusted horizontally or vertically to the nearest millimetre by using eye bolts, which guarantees a precise alignment of the gate.
The gate mounting (outside view) with a stabilising counter plate and LEGI fit fence connection.
Insertion cylinder lock
with a lock bar and catch (with anodised latches and collars)
The design of the bottom catch developed for LEGI VARIO significantly contributes to accident prevention, because it is integrated into the VARIO gate frame and is blocked and inaccessible when the gate is closed.
hot-dip galvanised DIN EN ISO 1461
hot-dip galvanised DIN EN ISO 1461 and additional powder coating
